st augustine grass pre emergent herbicide 0-0-7 + Pre-Emergent Herbicide
SKU: 78287744670
st augustine grass pre emergent herbicide

st augustine grass pre emergent herbicide 0-0-7 + Pre-Emergent Herbicide

Sale price$20.87 Regular price$23.19
Save 10%

Pay in installments of $5.80 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 28 - Jul 3

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

st augustine grass pre emergent herbicide 0-0-7 + Pre-Emergent HerbicidePre emergent herbicide, when applied at the right times of year, will control weed populations before you see them. They do this by inhibiting seeds from forming roots, thus killing them as they germinate. Eradicating weeds when they germinate is the most efficient way to control weed populations is lawns, flower beds, and even gravel driveways and walkways. Its time efficient and cost effective, saving you months of combating weeds by mowing, weed

Pre-emergent herbicide, when applied at the right times of year, will control weed populations before you see them. They do this by inhibiting seeds from forming roots, thus killing them as they germinate.

Eradicating weeds when they germinate is the most efficient way to control weed populations is lawns, flower beds, and even gravel driveways and walkways. It’s time-efficient and cost-effective, saving you months of combating weeds by mowing, weed whacking, hand pulling, digging, and from using costlier products to spray out weeds.

  • 25 lb. bags cover up to 4,000 sq. ft.
  • 50 lb. bag covers up to 8,000 sq. ft.
  • Contains 0-0-7 fertilizer plus Barricade pre-emergent herbicide
  • No nitrogen makes it safe to apply to dormant warm season lawns (Bermuda, Centipede, Zoysia) in winter and autumn


Apply only at the recommended rate.

Use our yellow walk-behind spreader to distribute this granular product.

When to apply pre-emergent herbicide:

  • Warm-Season Lawns: Apply to established lawns 3 times a year in late winter, early spring, and early fall to prevent weeds in Bermuda and Zoysia; apply 2 times a year in late winter and early fall to Centipede and St. Augustine.
  • Cool-Season Lawns: For Tall Fescue lawns we recommend 16-4-8 fertilizer with pre-emergent in the cool months of fall (if not reseeding) and in winter. If you've already fertilized your Tall Fescue with nitrogen, then choose 0-0-7 with pre-emergent because it doesn't contain nitrogen.
  • Apply in the morning before temperatures rise above 80 degrees; do not apply during the heat of the day.
  • Apply it after one full growing season when your lawn in fully rooted in and you can no longer pull up areas of the sod, after you’ve mowed it at least three times, and after you can no longer see the seams.


When NOT to apply pre-emergent herbicide:

  • When seeding lawns: Do not apply this product or any pre-emergent herbicide if you're planning on reseeding your lawn because it will inhibit germination of that seed too. If you have applied pre-emergent, wait 3-4 months before planting seeds, depending on climate conditions.
  • When laying new sod: Do not apply pre-emergent when laying sod because it will inhibit root formation in your new lawn too. Likewise, do not apply pre-emergent before laying new sod - if you have applied pre-emergent, wait 3-4 months (depending on climate conditions) before laying new sod.
  • Don't Apply too Soon: If you laid warm season sod in autumn, chances are it will need one full growing season (summer) to root in and fill in the seams, thus skipping the winter and spring applications. If you laid sod in the autumn, here is a general application timetable:
    • Zoysia - Safe to apply after Zoysia sod is 12 months old
    • Centipede - Safe to apply after Centipede sod is 12 months old
    • St. Augustine - Safe to apply after St. Augustine sod is 12 months old
    • Bermuda* - Safe to apply after Bermuda sod is 6 months old
    • Tall Fescue - Safe to apply after Tall Fescue is 4 months old


*TifTuf Bermudagrass is the quickest sod to establish and beats expectations for filling in the seams. If you lay the TifTuf Bermudagrass variety late summer and it’s fully rooted in and no seams are visible, it’s safe to apply the winter application of pre-emergent herbicide.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 78287744670

Discover Niche Categories That Outsell st augustine grass pre emergent herbicide

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 544 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Juan Muratalla
Draper, US
★★★★★ 5
Excellent Quality and Reliable Performance from Anker’s 8-in-1 USB-C Hub
I’m really impressed with this Anker USB-C Hub with Ethernet (8-in-1). The build quality feels premium, setup was completely plug-and-play, and all ports work flawlessly with my laptop. The Ethernet connection is stable and fast, which has been perfect for work calls and large file transfers. I also love how compact and portable it is while still offering plenty of connectivity options. HDMI output looks great, USB ports transfer quickly, and the SD card reader is very convenient for photo and video work. Anker continues to deliver reliable products, and this hub is no exception. Highly recommended if you need a dependable all-in-one USB-C hub for productivity or travel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Tommy
Boise, US
★★★★★ 5
Works great (quick test)
Just got this and tested and works great I attached to my MacBook with Ethernet and had a solid connection I tested my steam deck by plugging in Ethernet then adding HDMI then adding power and everything worked as it was plugged in I tested my Nintendo switch even though it clearly states it's not supported and it did not work at all. Even the power pass through did nothing. This is not even remotely a problem since it was advertised as such but I figured it was with a try and worth noting
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
K
Verified Purchase
kunoh
San Leandro, US
★★★★★ 4
Despite some caveats; this is a versatile hub
The Anker 555 8-in-1 USB-C Hub is a good buy if you’re looking for a hub from a reputable brand. I use it with an M1 Macbook Air, and it has been reliable so far. This hub has the following ports: 1 USB-C data port, 1 USB-C Power Delivery Port, 2 USB-A data ports, 1 HDMI port, an Ethernet port, and a microSD/SD card reader. Charging, PD (Power Delivery): To keep my Macbook charging, I connect a PD (Power Delivery) capable cable to the USB-C port meant for PD. (The other USB-C Port on this hub is meant only for data.) Once connected, the hub will eventually become warm to the touch, but this hasn’t caused any problems so far. Video Performance - no problems in 1440p I can connect my 1440p 144hz monitor to this hub’s HDMI port and my Macbook Air has no problem outputting a refresh speed of 144hz, as well the lower refresh rates of 120hz and 60hz. (I do not have a 4k monitor, so I could not test that.) USB-A Ports - works flawlessly I’ve tried keyboards, USB Drives, and even gaming Mice. All of these devices work as expected when connected to the USB-A Ports. Ethernet - Excellent speed I've connect this hub using an Ethernet cable to Gigabit speed Internet. The speed is just as fast as other computers on the network, and there is no slowdown at all, even with most of the ports on the hub being used. Gaming Keyboards with USB-C connectors - some issues. Some peripherals such as keyboards with USB-C connectors may not work on the USB-C ports on this hub. I tried using a Glorious GMMK Mechanical Keyboard and it did not work with this hub’s USB-C ports. (Of course you could try to simply use a USB-C to USB-A adaptor and then connect via the other USB ports on the hub instead.) Extension Cable - Use a Thunderbolt 4 cable Although this is totally optional, I like to use a small, 6-inch USB-C Extension cable to allow this hub to have more slack away from my laptop when connected. To allow this to work, I had to use a Thunderbolt 4 extension cable. I've tried other cables such as a Thunderbolt 3 extension cable. However, some of the attached devices on the hub were not recognized. Only the the Thunderbolt 4 extension cable allowed all my attached devices to be recognized. Other devices I have successfully connected an external SSD via the USB-C data port on this hub. I also regularly use an external DAC using the USB-A ports connecting to an IFI HIP DAC. Both of these devices work perfectly with this hub. Data transfer speed is rated at 10Gbs, though I haven't actually confirmed that. It works well enough for my purposes of transferring text documents and the occasional batch of vacation photos to my external SSD. Conclusion This hub from Anker is rated at 10Gbs which is plenty for me. But if you regularly transfer large amounts of data (like for video editing), I would instead recommend a powered docking station such as those from CalDigit. But for me, this portable hub does everything I need, and for much less money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2023
S
Verified Purchase
SamCat
Lexington, US
★★★★★ 5
Almost perfect, could use one more USB-C Gen 2 port and a metal case instead of plastic.
Never really had any problems with Anker gear, I've come to trust the brand name. This little hub is almost perfect for use with my 2019 MacBook Pro, but where Anker really dropped the ball is by not adding one more USB-C port. I mean, there's two, but if one is dedicated to power devices only that doesn't really leave much room for expansion by only giving you one extra, I mean they were thoughtful enough to give you two USB-A ports. I do like that the USB-C and two USB-A ports are version 3.2 Gen 2 rated for up to 10Gbps transfer speeds versus Gen 1 at 5Gbps. The plastic casing does get hot, not sure if aluminum metal would be any better, but it would feel nicer, plastic just feels cheap. Also, a dark case with dark letter printing doesn't work because you can't see the writing, should have used lighter letter coloring. Otherwise, solid performer. I'll keep it along with my other one because having two hubs with a laptop is convenient so I don't have to always haul a hub around from place to place. PROS: • 1 USB-C port version 3.2 Gen 2 rated up to 10Gbps. • 2 USB-A ports version 3.2 Gen 2 rated up to 10Gbps. • Also includes, HDMI, Ethernet, SD and micro SD card ports. CONS: • Plastic casing, gets hot. • Should have one more USB-C port. • Port description lettering is too dark, gets lost against dark case color, should have used white or silver lettering instead. • No audio port.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2024
M
Verified Purchase
Mares by the Bay
Omaha, US
★★★★★ 5
It WORKS! I'm Back at Work. Thx to Apple for support and Amazon for fast delivery
I am thrilled to report that the Anker USB C Hub with Ethernet fixed a dire problem that nailed me when I switched from my maybe-20 year old dying wired Apple Extended Keyboard to the Macally keyboard comparable (with USB-C connection). I have a 2023 MacBook Pro 14", a lovely workhorse, with 3 USB-C/Thunderbolt ports, a MagSafe power port and an HDMI port (with, it turned out, limited ability to handle UHD displays, so useless for my desk setup). It turned out my old Dockteck hub with ethernet didn't have thunderbolt capable USB-C ports, so my new MacAlly keyboard connected to that hub stopped working. On top of that, as I swapped with my Logi webcam, it also required a trickle of power the Dockteck hub didn't provide. As soon as I figured out what the issue was, I read up on several multiport adapters with ethernet, and it seemed that either I would be stuck purchasing WAY more than I needed, adding another bulky (annoying!) device on my desk surface and costing me close to $200. This seemed crazy, so I called Apple Store support. The only Apple Store multiport adapter was useless to me (and also $80) because, of all weird things, it had only ONE USB-C/Thunderbolt compatible port among 8--most ports were legacy. (Ugly too, just saying folks don't HAVE to make devices ugly!) The Apple Store rep, in one of those brilliant customer rep incidents, understood quickly the challenge, said Apple Store didn't have anything that would work for me, but SHE KNEW SOMEONE (ta-da! better than AI!) who would know and could recommend. Three minutes later she said this Anker device would work. I had it in hand by 6pm same day. So this is not just a rave for a solution that WORKS, but also a thank you to the great support from Apple to get me back to work fast. And Amazon for getting the item to me fast too!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026

recommand products